Petersen Products Company, pipe plug, plugs, packers, hot tapping

Multi-Flex™ Heavy Duty Pipe Plugs Standard and custom plugs are available for almost any application. Configurations are available for high and low pressure, high and low temperature, and almost any chemical and fluid environment.	Multi-Flex™ Medium Duty Pipe Plugs Similar to the 124-Series but have a lower pressure rating and a shorter inflated contact length, all pipeline sizes.	Multi-Flex™ Hot Tap Insertion Plugs Similar to the 124-Series but with a higher pressure rating and configured for hot tap insertion into a pressurized pipeline, all pipeline sizes.	Multi-Flex™ Line Stop Plugs Is used for higher pressure pipe plugging with installation possible through a manhole, a live hot tap or otherwise inaccessible pipelines. This flexible plug will conform to almost any pipe configuration.	Hot Tap Pipe Plugging Systems Typically used for plugging of pipelines through a hot tap in the side of the pipe or through a valve on the end of a pipe.
114 & 115 Series Low Cost Multi-Flex Pipe Plugs W&W/O By-Pass	124 & 125 Series Multi-Flex Pipe Plugs W&W/O By-Pass	128 Series Multi-Flex Hot Tap Insertion Plugs	129 Series Multi-Flex High Pressure Hot Tap Insertion LS Plugs	Hot Tap Pipe Plugging Systems
Rigid By-Pass Pipe Plugs Rigid Core Plugs are generally for higher pressures.	Point Repair Packers May be configured for ambient, hot water or steam cure relining, any size.	Lateral Joint "T" Packers Deflates to small flexible size for easy insertion into laterals.	Oil Resistant Molded Rubber Plugs Kevlar reinforced oil resistant municipal style plugs with or without by-pass, 1.6" to 60" pipelines.	Gas Plugs The Low Pressure Gas Plugs consists of an inner bladder made of a high quality nitrile encased in a 100% Polyester fabric cover.
126 Series Multi-Flex Rigid By-Pass Pipe Plugs	118 & 119 Series Multi-Flex Packers W&W/O By-Pass	116 Series Multi-Flex Lateral Joint "T" Packers	130-5 Series Point Repair Carriers W&W/O By-Pass (Made by Cherne)	154 Series Gas Plugs
Oil Resistant Molded Rubber Plugs Kevlar reinforced oil resistant municipal style plugs with or without by-pass, 1.6" to 60" pipelines.	Oil Resistant Molded Rubber Plugs Kevlar reinforced oil resistant municipal style plugs with or without by-pass, 1.6" to 60" pipelines.	Molded Rubber Test Plugs Multi-size Kevlar reinforced municipal style test plugs, 1.6" to 60" pipelines.	Oil Resistant Molded Rubber Plugs Kevlar reinforced oil resistant municipal style plugs with or without by-pass, 1.6" to 60" pipelines.	Oil Resistant Molded Rubber Plugs Kevlar reinforced oil resistant municipal style plugs with or without by-pass, 1.6" to 60" pipelines.
130-1 Series Stack Test Style Rubber Test Plugs (Made by Cherne)	130-0 Series Plumber Style Rubber Test Plugs (Made by Cherne)	137 Series Plumber Style Rubber Test Plugs W&W/O By-Pass	130-2 Series Municipal Style Muni-Ball By-Pass Plugs (Made by Cherne)	130-8 Series Municipal Sleeve Style By-Pass Plugs (Made by Cherne)
135 Series Pneumatic Pillow Stopper Plugs Often the lowest cost way to plug a larger diameter low pressure pipeline.	Molded Rubber Test Plugs These multi-size plugs are ideal for pressure testing most pipelines from 3 5/8" to 60" diameter.	Plumber Style Molded Rubber Test Plugs Economical plugs for pressure testing pipelines, 0.8" to 12" pipelines.	High Pressure Molded Rubber Test Plugs Kevlar® reinforced high pressure municipal style plugs, 4" to 24" pipelines.	Molded Rubber Test Plugs These multi-size plugs are ideal for pressure testing most pipelines from 3 5/8" to 60" diameter.
134 Series Municipal Kevlar Reinforced Rubber Plugs Without By-Pass	136 Series Municipal Kevlar Reinforced Rubber Plugs With By-Pass	139 Series Municipal High Pressure Pipe Plugs	133 Series Municipal Oil Resistant Kevlar Reinforced Rubber Plugs W&W/O By-Pass	130-6 Series Large Flow-Through By-Pass Plugs (Made by Cherne)
Molded Rubber Test Plugs These multi-size plugs are ideal for pressure testing most pipelines from 3 5/8" to 60" diameter.	Long Two-Stage Pipe Plugs Used for blocking and testing laterals and Y joints, 1.75" to 6" pipelines.	Long Two-Stage Pipe Plugs Used for blocking and testing laterals and Y joints, 1.75" to 6" pipelines.	Oil Resistant Molded Rubber Plugs Kevlar reinforced oil resistant municipal style plugs with or without by-pass, 1.6" to 60" pipelines.	Oil Resistant Molded Rubber Plugs Kevlar reinforced oil resistant municipal style plugs with or without by-pass, 1.6" to 60" pipelines.
130-7 Series Remote Placement Plug (Made by Cherne)	130-3 Series Long Test- Ball Plugs (Made by Cherne)	138 Series Long Two-Stage Pipe Plugs	130-9 Series Pillow Stopper Plugs W&W/O By-Pass (Made by Cherne)	135 Series Pneumatic Pillow Stopper Plugs W&W/O By-Pass
Oil Resistant Molded Rubber Plugs Kevlar reinforced oil resistant municipal style plugs with or without by-pass, 1.6" to 60" pipelines.
130-4 Series Leak Detector Plugs (Made by Cherne)

Inflatable Pipe Plugs for Almost Any Application